To print larger objects:

With larger printing volume, Ultimaker S5 provides a reliable 3D printing experience. For large technical printing objects, Tough PLA material has the toughness similar to ABS and the simplicity of PLA.

Optimize materials:

Ultimaker materials have been extensively tested, and you can get great results on Ultimaker S5. Ultimaker Cura software comes with pre-set configuration files, so you don't need to spend too much time on complex slice settings.

Infinite possibilities:

3D printing ranges from rapid prototypes to complex technical parts, including Ultimaker's series of construction and support materials. With the open wire system, you can also choose customized material solutions.

Increase reliability

The active platform correction function can ensure that you have a perfect first layer, close the front to control the air flow, and the wire flow sensor will pause before the material runs out to notify you. You can trust S5 to help you do a good job.

Larger print volume

The volume of 330 x 240 x 300mm, combined with Ultimaker's reliable double extrusion and water-soluble support, allows you to realize your design more freely or print multiple parts at a time, so it can meet your needs with high efficiency and be installed comfortably on you Desk.

Quick setting, high running time

Ultimaker's unique printing nozzle design allows you to exchange nozzles within a few seconds, switch between printing and supporting materials, and choose 0.8, 0.4 or 0.25 mm nozzles to meet fast or fine-detailed printing.

Easy touch control

The 11.9 cm touch screen allows you to easily operate the 3D printer. The guide screen on the screen will explain setting changes and maintenance, as well as a preview screen during printing.

Connection design

Ultimaker S5 can print via Wi-Fi, Internet or USB, and can monitor the printing progress through the built-in camera.